Thermal Drones for Oil, Gas and Emissions Work
A refinery or tank farm is a heat map. Product levels, tank roof condition, flare behaviour, steam traps and process piping all read differently by temperature, and a drone covers in twenty minutes what an operator walks in an afternoon. One distinction matters before anything else. Radiometric thermal cameras — which is what most drone payloads are — find heat anomalies: a hot bearing, a cold tank roof seam, an abnormal flare. Imaging a specific gas plume (methane or VOC) needs a dedicated optical gas imaging payload with a cooled mid-wave sensor tuned to that gas. If emissions work is the goal, say so when you ask, because the payload changes the whole system.
Get a payload recommendation for your siteRecommended drone & thermal payload
3 picksDJI Matrice 4TD
$7,499
Integrated radiometric thermal with zoom in a compact airframe, practical for routine tank, flare and piping surveys.
DJI Zenmuse H30T
$11,999
Thermal, wide-angle and laser rangefinding for Matrice 350 / 400-class aircraft, with the rangefinder useful for measuring distance to a stack or tank seam.
Autel EVO Max 4T XE
$8,999
A larger integrated thermal aircraft for sites where one system has to cover both close inspection and wider route survey.
What this mission demands
Know which sensor the job needs
Radiometric thermal finds heat anomalies on equipment. Gas imaging needs a cooled OGI payload tuned to the gas. Buying the wrong one is the most expensive mistake in this mission.
Standoff and zoom
Process areas have exclusion zones and hot surfaces. A zoomed payload lets a crew read a flange or a tank seam from outside the area rather than over it.
Documentation that survives audit
A recorded temperature, an asset tag and a timestamp turn an image into an inspection record a regulator or an insurer will accept.
Route efficiency
Pipelines and tank farms are large. Plan endurance and waypoint routes so a single crew covers the route in one shift rather than returning to swap batteries.
Oil & gas inspection aircraft & thermal payloads
24 products
640×512, 8mm lens, 25 mK NETD, LRF, 50MP RGB, 16x hybrid zoom, IP44 rated, 1.18kg, 42 min flight time · 25mK NETD · 437yd detection · 31oz · 24-month warranty
437 yd detection
or $1,292/mo · 0% APR

384x288 · 19mm lens · 45mK NETD · Dual Sensor · DJI M300 · 480g · 200yd detection · 16oz · 36-month warranty
200 yd detection
or $625/mo · 0% APR

384 resolution · 12-month warranty
or $2,186/mo · 0% APR

384 resolution · 43oz · 12-month warranty
≈490 yd detection (modeled)
or $665/mo · 0% APR

384 resolution · 12-month warranty
≈490 yd detection (modeled)
or $912/mo · 0% APR

384 resolution · 12-month warranty
or $75/mo · 0% APR

384 resolution · 12-month warranty
or $142/mo · 0% APR

384 resolution · 12-month warranty
or $67/mo · 0% APR

384 resolution · 12-month warranty
or $50/mo · 0% APR

640 resolution
or $4,526/mo · 0% APR

384 resolution · 12-month warranty

384 resolution · 12-month warranty
or $35/mo · 0% APR

384 resolution · 12-month warranty
or $817/mo · 0% APR

384 resolution · 40.1oz · 24-month warranty
≈530 yd detection (modeled)
or $400/mo · 0% APR

384 resolution · 12-month warranty

384 resolution · 12-month warranty
or $157/mo · 0% APR

384 resolution · 28oz · 60-month warranty
or $50/mo · 0% APR

384 resolution · 12-month warranty
or $29/mo · 0% APR

384 resolution
or $812/mo · 0% APR

384 resolution · 12-month warranty
Detection range not published

384 resolution · 24-month warranty
≈370 yd detection (modeled)
or $952/mo · 0% APR

384 resolution · 24-month warranty
Detection range not published
or $3/mo · 0% APR

384 resolution · 48oz · 60-month warranty
or $51/mo · 0% APR

384 resolution
or $1,050/mo · 0% APR
Questions buyers ask
Not with a radiometric thermal camera. Gas imaging needs a dedicated optical gas imaging payload with a cooled sensor tuned to the gas; a radiometric camera shows equipment temperature, not a plume. Tell us the gas and we will spec the right system.